सभी उत्पाद
-
ग्रेग ब्लेड्स1सबसे अच्छी सेवा, सबसे अच्छी कीमत 2आशा है कि हम भविष्य में एक साथ अधिक व्यापार कर सकते हैं। 3चूंकि आपकी सेवा इतनी अच्छी है, मैं नानचांग CJ-6 बंधुता के बीच Xixian फॉरवर्ड के बारे में अच्छा शब्द फैलाऊंगा। -
अरशद सलीम1.मैं किसी भी कंपनी से सीधे संपर्क नहीं करूंगा, आप चीन में मेरे सोर्स होंगे. 2.आप लोग बहुत अच्छे हैं, हमारे पास एक बहुत ही सुचारू और सफल सहयोग है. ये हमारे संयुक्त प्रयासों के परिणाम हैं.
FWD100-24 Series 100W DC-DC Power Module with 1500VDC Isolation and Ultra-compact Size for Aviation Applications
| उत्पत्ति के प्लेस | चीन |
|---|---|
| ब्रांड नाम | Forward |
| मॉडल संख्या | FWD100-24 श्रृंखला |
| न्यूनतम आदेश मात्रा | 1 |
| प्रसव के समय | 5-8 कार्य दिवस |
| भुगतान शर्तें | एल/सी,टी/टी |
| आपूर्ति की क्षमता | 10000/वर्ष |
उत्पाद विवरण
| इनपुट (वीडीसी) | 9～40V | आकार | 60*25*12 मिमी |
|---|---|---|---|
| तापमान चक्र | -55～ + 125℃, 10 बार | वज़न | 58g |
| ठंडा करने की विधि | संवहन, बलपूर्वक वायु शीतलन, चालन | सुरक्षा | नमीरोधी, नमक स्प्रेरोधी, फफूंदरोधी |
उत्पाद विवरण
FWD100-24 Series 270V Input Localization POWER SERIES DC-DC POWER MODULE
Key Features
- High Efficiency: 91%
- Max Output Power: Up to 100W
- Input/Output Isolation: 1500VDC
- Ultra-compact size: 60 * 25 * 12 mm
- High reliability: No internal Aluminum and Tantalum electrolytic capacitors
- Over current, over voltage and short-circuit protection
- Applications: Industrial control, radar, fire control, missile-borne, communication systems
Model Specifications
| Model | Input (VDC) | Output (VDC) | Output Current | Ripple Vp-p | Efficiency | Size(mm) |
|---|---|---|---|---|---|---|
| FWD100-24S3R3C | 9-40V | 3.3V | 24.24A | 75mV | 89% | 60 * 25 * 12 |
| FWD100-24S05C | 9-40V | 5.0V | 20.0A | 75mV | 89% | 60 * 25 * 12 |
| FWD100-24S12C | 9-40V | 12V | 8.33A | 120mV | 89.5% | 60 * 25 * 12 |
| FWD100-24S15C | 9-40V | 15V | 6.66A | 150mV | 90% | 60 * 25 * 12 |
| FWD100-24S24C | 9-40V | 24V | 4.16A | 240mV | 90% | 60 * 25 * 12 |
| FWD100-24S28C | 9-40V | 28V | 3.57A | 280mV | 91% | 60 * 25 * 12 |
| FWD100-24S48C | 9-40V | 48V | 2.08A | 480mV | 88% | 60 * 25 * 12 |
Important Notes
All data is tested at +25℃ unless otherwise specified, under rated input/output, full load and pure resistive load.
Contact us for custom voltage output requirements.
Models with "N" postfix indicate negative logic, flange-R configuration.
Suffix plus-M (-55 degree activation) naming rules: N-R-M
Input Parameters
| Input Parameter | Remark | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Input voltage range | 24Vin | 9 | 24 | 40 | VDC |
| Input surge voltage(Max 100ms) | 24Vin | 50 | VDC | ||
|
UVLO |
24Vin Input power on 6.5-8.5Vdc | ||||
| 24Vin Input power off 6.0-6.8Vdc | |||||
| Input/output filtering | π Type | Multi-level | |||
| Enable logic | Positive logic: Power on (Enable pin open), Power off (Enable pin shorted) Negative logic: Power off (Enable pin open), Power on (Enable pin shorted) |
||||
General Specifications
| General Specification | Remark | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Input/output isolation voltage | 1500 | VDC | |||
| Input/housing isolation voltage | 1500 | VDC | |||
| Output/housing isolation voltage | 500 | VDC | |||
| Insulation resistance | DC500V | 100 | MΩ | ||
| Switching frequency | 240 | 320/265 | 400 | kHz | |
| Working temperature | -40 | 100 | ℃ | ||
| Storage temperature | -55 | 100 | ℃ | ||
| Protection | Moisture proof, salt spray proof, mold proof | ||||
| Size | 60 * 25 * 12 | mm | |||
| Cooling method | Convection, forced air cooling, conduction | ||||
| Weight | 58 | g | |||
Selection Testing Standards
| Test Project | Method | Test Condition | Industrial Grade | Grade |
|---|---|---|---|---|
| Internal visual inspection | GJB548B, 2017.1 | 100% | 100% | |
| High temperature storage | GJB150.4A | +125℃, 48h | 100% | |
| Low temperature storage | GJB150.4A | -55℃, 48h | 100% | |
| Temperature cycle | GJB548B, 1010.1 | -55～+125℃, 10 times | 100% | |
| Intermediate voltage testing | - | Tc = +25℃ | 100% | |
| Burn-in | Tc = +85℃, 48h | Random check | 100% | |
| Final electrical test | Product specification | -40℃, +25℃, +85℃ (Tc) | 100% | 100% |
| External visual inspection | GJB548B, 2009.1 | 100% | 100% |
Output Appearnce size and pin unit:mm
60mm(L)*25(W)*12mm(H)
Application Notes
Typical Application Circuit
The power supply has a built-in filter, which meets the requirements of general power supply applications. If a power supply system with higher requirements is needed, an external filtering network (such as an LC or π type network) can be added to the input circuit. A typical application circuit is shown in the figure.
Recommended values for external components:
|
PN |
Parts description |
Remark |
|
L1 |
Common mode inductors: Select appropriate parameter values based on actual system application requirements |
|
|
C 1, C2 |
X2 capacitors: Select appropriate parameter values based on actual system application requirements. |
|
|
C4, C5 |
Y1 capacitor: Select appropriate parameter values based on actual system application requirements. |
|
|
C3 |
470µF-63V/100V |
Solid-state capacitors, or low-ESR electrolytic capacitors, have good performance characteristics across a wide range of temperatures. |
|
C6 |
220µF-6.8V/25V/35V/50V/100V |
Polymer tantalum capacitors or solid-state capacitors, or low-ESR electrolytic capacitors, offer good performance across a wide range of temperatures. |
अनुशंसित उत्पाद